| |
|
|
|
AirCare Small System Console - ACC1-xx Series |
|
|
|
|
|
AirCare Small System Console - ACC1-1 Series |
A special build of the ACC1-xx with 1 address
Key Features:
- Low cost, single address option
- Global command control
- Set-back capability
|
|
|
|
|
AirCare Small System Console - ACC2 Series |
Has up to 4 independent zones of 125 addresses each along with an alpha-numeric display to provide easier movement around a larger network
- ACC2-125 (1 zone) - up to 125 addresses
- ACC2-250 (2 zone) - up to 250 addresses
- ACC2-375 (3 zone) - up to 375 addresses
- ACC2-500 (4 zone) - up to 500 addresses
Main Functions:
- Motor status monitoring
- Individual speed adjustment
- Global speed adjustment
- Zone set-back speed adjustment
Features:
- Wall-mount Console
- Simple User Interface
- 7-segment and bitmapped LED displays
- Two rotary encoders (knob/switch)
- Unit Select
- Parameter Adjust
- Menu Push Switch
- Enter/Exit Menu
- Supports medium to large scale networks
- RS485 (2 wire)
- Up to 125 slave nodes per zone
- Simple installer configuration
Electrical Connections:
- DC Power Connector : 2.1mm DC power jack (9-12V at 200mA)
- Modbus network : RJ45 socket for each zone
- RS232 Port : Connects to PC for diagnostics
|
|
|
GATEWAY Products
|
NetBiter® webSCADA Gateway
An industrial gateway that contains web server for monitor & control of system serial devices over the web. It contains capabilities such as alarm (SMS, Email & SNMP) & data log w/trend graphing. [Data Sheet]
|
NetBiter® RTU-TCP Gateway
Translates Modbus Serial (RTU or ASCII) to Modbus Ethernet (TCP) & mobile networks for use with BMS, PLC, SCADA, etc. It interfaces to AirCare smart motor controllers, power meters, temperature regulators etc., facilitates remote access & load control, as well as implementing larger systems. [Data Sheet]
|
NetBiter® Serial Server
A combination software program & remote serial COM port that can communicate in any language to configure, maintain or control remote devices. [Data Sheet]
|
NetBiter® I/O Extender
A device that allows digital and analog I/O signals to be interfaced with the NetBiter® webSCADA and the NetBiter® RTU-TCP gateways. The I/O Extender acts as a Modbus RTU slave device which can be controlled via the webSCADA or RTU-TCP gateway and makes it possible to extend the I/O capability of these products by providing access to digital and analog signals and equipment. [Data Sheet]
|
LMS, LonWorks - Modbus Gateway
It converts Modbus RTU registers to LonWorks variables, the gateway act as a Slave on the Modbus side. The module supports about 250 LonWorks Network variables (Standard Network Variable Types) which is configurable with the LWTool configuration program.
|
WebSCADA GSM/GPRS Modem
A combination wireless modem & NetBiter® webSCADA that facilitates worldwide
communication between a server & a webSCADA in a single part.
|
|
|
