AirCare Automation

:: Home :: About Us :: News :: Contact Us

(1) 888-543-8037 USA; (49) 6144-402908 Germany

[Back to News Home Page]

July 28, 2005

Introducing the new ACM1004

Small Cleanrooms often limit their FFU installations to AC fan driven solutions. Although a DC brushless fan system might be preferred, most DC brushless systems are cumbersome and expensive. While AirCare Automation VariPhase line of controls along with the AirCare Consoles make small AC FFU systems smart at a very low cost, this option is not readily available for the DC brushless system.

AirCare Automation introduces a line of Interface Modules for the GE-ECM motor driven FFU that work in the AirCare Small System platform!! All the features and convenience of the AirCare VariPhase^TM Small System can now be used in with the higher efficiency GE-ECM FFU platform. The AirCare GE-ECM Interface Module consists of a MODBUS interface for up to four GE-ECM Motors. This plug-in system allows systems from 1 FFU to 500 FFU to be intelligently controlled at a low cost.

By adding the versatility of the AirCare Console^TM you are benefiting from a simple and economical controller box which allows you to monitor a network of up to fifty units. The new consoles also provide set back provisions to save energy and extend filter life.

Module Features:

Controls multiple GE-ECM motors

ACM1002-2 motors, ACM1004-4 motors

Simple connections

Remote power network eases installation

LED diagnostics

Motor Status (4)

MODBUS RTU Protocol

Small Cleanroom System Features:

System size from 1 to 500 FFU's
controlled by a single Console

Out-of-the-Box performance

Easy to install; Easy to control

Global command Controls

Remote and Manual Set-back for
energy savings

Order the GE-ECM Demo System by 9/01/05
and receive a 20% discount.

Copyright AirCare Automation Inc. This news letter has been sent to your e-mail address based upon prior contact or industry source lists. Should you wish to be removed from further newsletters and updates, please e-mail service@aircareautomation.com with your request to be removed. For further information on our products visit our website: www.aircareautomation.com