| |
|
|
|
|
|
New Features/ Added Efficiency
|
AirCare Automation has updated our line of VariPhaseTM single-phase AC
motor controls to enhance the range of applications these drivers can can be used
for. The modifications provide additional interface features, improved closed loop
speed regulation, and often eliminates the need for additional bias power for the
sensor.
 New Features:
- Network Interface pins on the
VariPhase have been removed to make
room for additional Analog Interfaces.
- A second Analog Input (designated
ANA2) added, allowing any sensor
(feedback) that has a 0-5 volt output to
provide closed-loop regulation
automatically.
- Additional bias power of 12V added, with
sufficient output to meet most needs of
sensors used.
These features now allow the AirCare VariPhaseTM to be controlled in 3 distinct modes:
Open-loop control - no feedback just open loop speed control
Closed-loop "speed" control - close loop with Hall/tach sensor for RPM control.
Closed-loop analog control - Any sensor feedback with 0-5 volt output range.
In closed loop mode, the full capability of of the VariPhase PID control loop can be utilized
making loop stability and rapid performance an easy task.
 The AirCare VariPhaseTM line is available
now in ratings of 1 ampere to 14 amperes.
All VariPhase units have the same I/O
characteristics, allowing consistency of
features and deployment giving true power
translatable solutions to the market.
Network register settings and analog
interface (7-way connector) have been
standardized to be the same. These new
features are easy to access and set-up
through the RJ-45 Network using standard
MODBUS RTU protocol or more easily
through our AirCare ConsoleTM.
With the improved AirCare VariPhaseTM closed loop control of a fan system is
now easy to set-up, maintain, and monitor.
|
Copyright AirCare Automation Inc.
This news letter has been sent to your e-mail address based upon prior contact or industry source lists. Should you wish to be removed from further newsletters and updates, please e-mail service@aircareautomation.com with your request to be removed. For further information on our products visit our website: www.aircareautomation.com |
|
|
|
|
|
